Stern Pinball Repair Service MPU

My Stern M-100 and M-200 MPU services are now limited to the following services only.
I don't like to do corrosion repair on anything but minor issues, but I'll be happy to take a look at your board to see if I can repair it (or just e-mail me a photo of your board). If not, I'll send it off to Chris Munson for repair, as he does great work on most any level of corrosion repair.

Here's a table of rates for each type of repair, and all prices include parts and labor. If I can't fix it, you don't pay!

I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.

Minor to Medium Corrosion Repair Includes typical parts (resistors, capacitors, etc.). IC's, Sockets, etc., are extra Examples: minor, medium, major (don't even think about it)	$50.00 and up
Replace all header pins except the one on top (J5) Brand new rows for J1, 2, 3, and 4	$12.00
Replace all header pins PLUS the one on top (J5 - for sound boards) Brand new rows for J1, 2, 3, 4, and 5	$15.00
Install a memory capacitor to replace the on-board battery Never have to change a battery again	$10.00
Install an off-board battery pack w/ or w/o blocking diode Off-Board is the only safe way to use batteries! Your choice of two styles: charagable (no diode) or non-charagable (w/ diode) (batteries are NOT included)	$10.00
Testing Fee For any board deemed unrepairable	$10.00 and up
.100" connector kit, sold with any service above New housings, keys, and plenty of crimp-on pins.	$10.00 each

Prices above do not include return shipping

Here's a picture of an MPU-200 that had minor corrosion damage. It was repaired
and an off-board battery holder was installed:

Of course, there's always Ts & Cs (revised), and don't forget prices DO NOT include shipping.

If you decide to "do it yourself", visit Big Daddy or GPE for all the parts you'll need.
I'll still try to fix it when you're done. :-)

Thanks!